One dead burner on a four-burner range changes how a whole family eats. Call our referral line and we route you to an independent stove pro near Three Points who works on gas, electric coil, smooth-top and induction cooktops.
We do not send just anyone with a toolbox. The pros in our network work on cooktops week in and week out, and they know the difference between a bad spark module and a wet burner head.
The technicians in our network are independent business owners who carry their own licensing and insurance. You are welcome to ask for proof at the door, and a good pro will not blink.
After testing, the technician writes out a quote that names the part and the labor before anything gets replaced. You decide whether to go ahead.
We work the local schedule while you are still on the phone. Same-day visits happen often when a nearby pro has an open slot, and the dispatcher pins down a time window before you go.
Stove pros carry a manometer for gas pressure, a multimeter for switches and elements, spare igniters, burner orifices and the service manual for your model. That kit is what turns a guess into a real diagnosis.
Freestanding ranges, slide-in ranges, drop-in cooktops, induction surfaces and the heavy pro-style rangetops with open burners all come through our line. The problem is almost always on top: a burner, an igniter, a switch, a control board or the glass itself.
Have the model number handy if you can. It usually sits on a sticker under the cooktop lip, inside the storage drawer, or behind the lower kick panel, and it lets the tech pull the right parts list before arrival.
These are the cooktop faults that fill our phone log. If yours is not listed, call anyway; the dispatcher will match you with a pro who knows that model.
A burner that clicks and clicks after it lights, or one that never sparks at all, usually points to a wet or cracked igniter, a stuck valve switch, or a failing spark module. The tech checks each electrode gap and listens for which burner the module is firing.
If the flame looks orange, ragged or jumps off the burner, something is off with air or gas delivery. The independent pro cleans the ports and orifice, confirms the cap sits flat, and measures manifold pressure against the spec on the tech sheet.
When a coil burner stays cold, the culprit is usually the element, the receptacle block it plugs into, or the infinite switch behind the knob. A scorched or melted receptacle has to be replaced along with its wiring terminals, or the new coil will fail too.
A crack in a smooth-top is more than cosmetic: spills can reach live elements underneath. The tech tests the radiant element and limiter, checks the hot-surface indicator, and quotes a new glass top if the old one is damaged.
Induction cooktops throw error codes when a pan is not magnetic, the cooling fan stalls, or the power board fails. The pro reads the code, tests cookware compatibility with a magnet, and checks the fan and board before any part goes in.
A knob that spins without turning the valve, a valve stem that sticks, or a move from natural gas to propane all land in this group. The tech can swap orifices for the new fuel, adjust the regulator, and fit an anti-tip bracket on slide-in and freestanding units.
This table is not a substitute for a diagnosis, but it helps you describe the problem clearly to our dispatcher.
| Symptom | Common cause | What the tech checks |
|---|---|---|
| Clicking that will not stop | Wet or shorted valve switch, cracked igniter | Switch continuity, harness, igniter gap |
| No spark on any burner | Spark module or power supply | Module output and incoming voltage |
| Yellow or lifting flame | Clogged ports, wrong orifice, pressure off | Ports, cap seating, manometer reading |
| Coil only heats on high | Failed infinite switch | Switch cycling with a multimeter |
| Smooth-top zone stays cold | Radiant element or limiter open | Element and limiter resistance |
| Induction error code | Cookware, fan or power board | Code lookup, fan, board voltages |
No forms, no waiting for an email. Here is what happens after you dial our dispatch line.
One phone call starts everything. Tell us what the cooktop is doing, and we look for a nearby pro with time on the schedule.
A local pro heads your way with cooktop parts on board. The dispatcher tells you the arrival window before you hang up.
The pro tests the burner circuit or gas train with a multimeter or manometer, explains what failed, and writes an upfront quote. Nothing gets replaced until you say yes.
The job ends with a real test: each burner on low, medium and high, plus a soap or electronic leak check on gas connections. Ask the pro to put the parts and labor warranty in writing.
The technicians we route you to work from the tech sheet tucked inside most ranges. They test first, then quote. If a part is not on the truck, they tell you how long the order takes and book the return trip.
Call now and we will look for a local stove pro with an opening.
The igniter on our gas range would not quit clicking after a boil-over. The pro pulled the knobs, traced it to one wet switch under the panel, replaced it and tested every burner before he left.
I own a couple of older rentals and one tenant reported a burner that smelled hot. The technician found a melted receptacle block on the coil range, replaced it with new terminals and a new coil, and showed me the scorched wiring. Glad we caught it.
The induction top flashed a code every time I boiled water. The pro ruled out my cookware, then found a seized cooling fan under the glass. Simple fix once someone actually opened it up.
Our range needed an LP conversion after the move. The technician changed the orifices and regulator setting, then mounted the anti-tip bracket. The flames are blue and steady now.
The spark module fires whenever a switch tells it to. A spill, a cracked igniter or a failed switch behind the knob can keep that signal on, which is why the clicking never stops. A pro can test each switch and replace the bad one.
A yellow or orange flame means incomplete combustion, which can create soot and carbon monoxide. Common causes are clogged ports, a cap that sits crooked, or the wrong orifice for your fuel. Stop using that burner and have a pro check it.
Cut the power or the gas first. On electric ranges, flip the breaker; on gas ranges, close the shutoff behind the unit. Then call and we will route a pro who can replace the switch or valve that failed.
Cracked glass ceramic cannot be patched safely. The fix is a replacement top, and the pro checks the radiant elements and limiter while it is off. Avoid using the cooktop until then.
Most gas ranges and cooktops can be converted with an LP kit from the manufacturer. The pro swaps the burner orifices, adjusts the pressure regulator, and checks every flame afterward.
Induction only works with magnetic cookware. If a magnet does not stick firmly to the bottom of the pan, the zone will not heat. If your pans pass the magnet test, the technician looks at the coil, sensor and power board next.
We route stove calls from across Three Points and the surrounding towns. Whether your range sits in a downtown condo or a farmhouse at the edge of the county line, our dispatchers look for the closest pro with time to come out.
If you manage rentals, mention the unit and the tenant contact when you call. The dispatcher passes it to the pro so the visit goes smoothly.
Gas, electric or induction: call and we will find a pro near you.
